DJ Booth Installation Corporate event with lecturn Wall Mounted Lighting Bar Installation Lighting and Soiund Installation at a Local Hotel Connection Panel for Amplifier Rack Lighting supplied for a theatricla based performance Performing arts rehearsal studio lighting grid and curtain track system installation

Sound Equipment Hire

Sound is an important part of any event and here at EIS Audio Visual, we are very proud of the reputation that we have gained for consistently delivering good quality sound.

Based in North Wales, we specialise in providing sound equipment for all types of event, ranging from the hire of a simple vocal PA system for a small conference, presentation or speech, through to a fully staffed large scale sound system for a concert or festival.

Whatever the size of your event or your budget, we will always offer you the very best possible sound equipment at a very competitive price.

Audio Processing Equipment Rack

We now offer for hire, the largest and most comprehensive radio microphone stock throughout the whole of North Wales.
Available in handheld, lapel or headset versions, our Sennheiser radio microphone systems can be hired singularly or in pre-configured racks of 4 or 8, complete with power and antenna distribution.

As a part of our Sound Equipment Hire service, we offer the following:

PA System Hire – From a 500w vocal PA system to a 20kW concert PA

Speaker Cabinet Hire – Martin Audio, JBL, Turbosound, RCF, Bose, EV, Yamaha, LD Systems

Amplifier Hire - Crest, BSS, FFA, C-Audio, Yamaha

Signal Processing / Crossover & Graphic Equaliser Hire – XTA, BSS, Klark Teknik, DBX, Yamaha

Reverb & Multi Effects Unit Hire –Yamaha, Lexicon, TC Electronic

Noise Gate & Compressor Hire – Drawmer, DBX

Mixing Desk Hire – Midas, Soundcraft

CD, Minidisc & DAT Playback & Recording Equipment – Sony, Denon

Radio Microphone Hire – Sennheiser

Instrument & Vocal Microphone Hire – Shure, AKG, Sennheiser, Beyerdynamic

DI Box Hire – Emo, LD Systems

Microphone Stand Hire – Beyerdynamic, K&M

Speaker Stand Hire – K&M, Adam Hall

Speaker Cabinets

Martin audio F2 mid/hi cabinet
Martin audio F2 mid/hi cabinet

Containing a 12inch mid range, a 2 inch mid high compression driver and 3 x 1 inch ring radiator bullets the F2 mid high is a 3way cabinet, designed specifically for use in large scale and outdoor sound re-inforcement applications. It produces a clean sound with maximum efficiency, giving a high level of impact over a wide coverage area. It is designed for use with F2B bass cabinets.

 

Power Handling: 1000W

Martin audio F2 bass cabinet
Martin audio F2 bass cabinet

2 x 15 folded horn bass cabinet intended for use with Martin Audio F2 mid high cabinets. The F2B produces a natural and 'punchy' bass sound and is designed to be long throw. Ideally suited for use in large scale and outdoor sound re-inforcement applications.

 

 

Power Handling: 1000W

Martin audio BSX sub bass cabinet
Martin audio BSX sub bass cabinet

2 x 18 front loaded sub bas cabinet. Designed to efficiently deliver low frequency sub bass at high sound pressure levels. The BSX Intended to complement the F2B and F2 mid high where an extended bass response is required. Ideally suited for use in large scale and outdoor sound re-inforcement applications.

 

Power Handling: 1000W

Martin audio LE400 stage monitor
Martin audio LE400 stage monitor

The Martin LE 400 is classed as the 'industry stadard' stage monitor. Intended for use where a high output is required form a compact 2 way enclosure, it features a 15 inch LF driver combined with a high efficiency 1 inch HF driver. The cabinet is purpose designed to provide high levels of foldback on large stages.

 

Power Handling: 600W

RCF Event 6000 full range cabinet
RCF Event 6000 full range cabinet

The Event 6000 is a high quality full range speaker cabinet. It is a 3 way enclosure, containing 2 x 15 inch LF drivers combined with an 8 inch mid range and a 1 inch HF compression driver, providing the ability to reproduce high power levels with low distortion. The Event 6000 is perfectly suited for use in a wide range of medium sized sound re-inforcement applications. It is specifically designed for use with the ESW1018 where an extended bass response is required.

Power Handling: 1000W

RCF ESW 1018 sub bass cabinet
RCF ESW 1018 sub bass cabinet

The ESW 1018 is a high quality sub bass cabinet that has been specifically designed for use with the Event 6000 series speakers, where an extended bass response is required. The single 18 inch bass driver offers high definition, combined with very high efficiency and the ability to reproduce high power levels with low distortion. Ideally suited for use in medium scale sound re-inforcement applications.

Power Handling: 1000W

Turbosound TSE111mid/hi cabinet
Turbosound TSE111mid/hi cabinet

The TSE 111 is a classic Turbosound mid high cabinet that is specifically intended for use with TSE118 sub bass speakers. The cabinet contains a single 10 inch mid range, combined with a 1 inch HF compression driver. The TSE111 produces a very clean sound with maximum efficiency allowing high power levels to be achieved, with minimal distortion. Ideally suited for use in medium scale sound re-inforcement applications.

Power Handling: 500W

Turbosound TSE118 sub bass cabinet
Turbosound TSE118 sub bass cabinet

The TSE 118 is a classic Turbosound sub bass cabinet that is specifically intended for use with TSE111 mid high speakers. The single 18 inch bass driver offers the ability to reproduce high power levels of sub bass with low distortion. Ideally suited for use in medium scale sound re-inforcement applications.

 

Power Handling: 600W

JBL Soundpower M112 fill / monitor
JBL Soundpower M112 fill / monitor

Ideally suited to providing high quality foldback in medium sized applications. The M112 is a 2way passive enclosure, containing a 12 inch LF driver combined with a 1.5inch HF driver.

 

 

Power Handling: 500W

LD Systems 152 full range speaker
LD Systems 152 full range speaker

The LDP152 is purpose built for ease of use and maximum portablility. It is specifically designed for small to medium applications as a stand alone full range cabinet, ideally suited to vocal or music applications, producing a full and clear sound. It can also be combined with an optional sub bass cabinet where an extended bass response is required, or it can be used as a foldback monitor with the aid of optional clip on brackets. The moulded Polypropylene cabinet contains a single 15 inch LF combined with a 1 inch HF compression driver.

Power Handling: 350W

LD Systems 122 full range speaker
LD Systems 122 full range speaker

The highly compact size of the LDP122 allows for ease of use and maximum portablility. It is specifically designed for small to medium applications as a stand alone full range cabinet, ideally suited to vocal or music applications, producing a full and clear sound. It can also be combined with an optional sub bass cabinet where an extended bass response is required, or it can be used as a foldback monitor with the aid of optional clip on brackets. The moulded Polypropylene cabinet contains a single 12 inch LF combined with a 1 inch HF compression driver.

Power Handling: 250W

Anchor liberty MPB4600 battery powered speaker
Anchor liberty MPB4600 battery powered speaker

The 'Anchor liberty' is a battery powered speaker cabinet that is ideally suited to background music, public address and vocal applications where mains power is not available. After a single charge the speaker can run on its internal battery for approximately 6-8 hours. The speaker can also be used with 240V mains and comes complete with a built in amplifier. The unit features a built in Shure SM58 radio microphone and supports an array of inputs allowing both microphones and music to be controlled independently, whilst also having the capability to power a companion 'slave' speaker. The moulded Polypropylene cabinet contains a single 8 inch LF combined with a 4 inch HF driver. The Anchor liberty is an ideal stand alone system for smaller applications.

Power Handling: 100W

Bose 802 full range speaker
Bose 802 full range speaker

An industry standard for more than 20years, the Bose 802 is considered to be one of the finest portable speakers in its class. Offering portability with flexibility, the 802 is intended for a wide range of small to medium applications as a stand alone full range cabinet, suitable for vocal and music applications. It can also be combined with an optinal sub bass cabinet where an extended bass response is required. Made from moulded plastic the cabinet contains 8 x 4 inch drivers which work in combination to give a wide field of coverage, producing the familiar 'Bose sound'.

Power Handling: 400W

EV SX80 full range speaker
EV SX80 full range speaker

The Electro-Voice Sx80 is a compact, two way, high efficiency speaker, suitable for sound reinforcement or monitoring. Offering portability with flexibility, the very compact size of this unit, makes it ideal for use in a wide range of smaller applications for both vocal and background music. The moulded Polypropylene cabinet contains a single 8 inch LF combined with a HF compression driver.

 

Power Handling: 350W

Yamaha S 12E
Yamaha S 12E

Perfectly suited to both vocal use and background music the S 12E is a compact, two way speaker cabinet that is intended for use in a wide range of smaller applications . The cabinet contains a single 12 inch LF driver, combined with a 1 inch HF compression driver to give a clean and natural sound.

 

Power Handling: 300W

Yamaha SM 121V monitor
Yamaha SM 121V monitor

The Yamaha SM 121V monitor is specifically designed to provide high quality foldback in small to medium sized applications. The SM 121V is a 2 way passive enclosure, containing a 12 inch LF driver combined with a 1 inch HF driver.

 

 

Power Handling: 300W

Amplifiers

FFA 6000 amplifier
FFA 6000 amplifier

With unrivalled quality and performance, the FFA6000 is the market leader of amplifiers. Delivering an incredibly powerfull 3000W per channel, this pulse width modulation amplifier is ideally suited to todays bass requirements, acheiving truly stunning results in the largest of applications.

 

Output Power: 2 x 3000W

FFA 3600 amplifier
FFA 3600 amplifier

With unrivalled quality and performance, the FFA3600 is the market leader of amplifiers. Delivering a powerfull 1800W per channel, this pulse width modulation amplifier is ideally suited to a wide range of uses, acheiving truly stunning results in the largest of applications.

 

 

Output Power: 2 x 1800W

C-Audio Pulse 1100 amplifier
C-Audio Pulse 1100 amplifier

The Pulse 2 x 1100 is a high quality amplifier from C-audio, designed to perform well in a wide range of applications. Good all round amplifier.

 

 

Output Power: 2 x 1100W

C-Audio Pulse 650 amplifier
C-Audio Pulse 650 amplifier

The high quality Pulse 2 x 650 amplifier from C-audio, performs well in a wide range of applications. With a clean and crisp sound, the amplifier is most suited to reproducing high frequency signals.

 

 

Output Power: 2 x 1100W

C-Audio Pulse 4 x 300 amplifier
C-Audio Pulse 4 x 300 amplifier

This versitile 4 channel amplifier can be used in a number of different combinations, allowing for maximum versitility. Best suited to smaller applications and monitoring.

 

 

Output Power: 4 x 300W

Crest 8001 amplifier
Crest 8001 amplifier

The Crest 8001 is a compact, high-power amplifier designed to meet the most stringent needs of professional sound reinforcement. Delivering a powerfull 1225W per channel, this amplifier is ideally suited to a wide range of applications.

 

 

Output Power: 2 x 1275W

Crest 6001 amplifier
Crest 6001 amplifier

The Crest 6001 is a compact, high-power amplifier designed to meet the most stringent needs of professional sound reinforcement. Delivering a 650W per channel, this amplifier is ideally suited to a wide range of applications.

 

 

Output Power: 2 x 650W

Yamaha P5000S amplifier
Yamaha P5000S amplifier

The Yamaha P5000 amplifier offers superior sound quality and performance. With a clean and natural sound, the amplifier is suitable for use in wide range of applications.

 


Output Power: 2 x 700W

Yamaha P2500S amplifier
Yamaha P2500S amplifier

The Yamaha P2500 amplifier offers superior sound quality and performance. With a clean and natural sound, the amplifier is most suited to reproducing full range and high frequency signals in a wide range of applications.

 

 

Output Power: 2 x 350W

Yamaha CP2000 amplifier
Yamaha CP2000 amplifier

The Yamaha CP2000 amplifier delivers outstanding sound quality in a wide range of applications. With a clean and smooth sound, the amplifier is most suited to reproducing full range and high frequency signals.

 

 

Output Power: 2 x 650W

Yamaha P1600 amplifier
Yamaha P1600 amplifier

The Yamaha P1600 amplifier delivers outstanding sound quality in a wide range of smaller applications. With a clean and smooth sound, the amplifier is most suited to reproducing full range and high frequency signals.

 

 

Output Power: 2 x 2500W

Signal Processing

System Controllers / Crossovers
BSS FDS 334 Minidrive
BSS FDS 334 Minidrive

2 in - 4 out programable system controller. Provides the following functions:
1) Crossovers (Linkwitz-Riley, Bessel or Butterworth),
2) Band limiters,
3) Equalisation assignable to inputs and outputs,
4) Input and output delay

 

DBX Driverack PA
DBX Driverack PA

2 in - 6 out programable system controller. Provides the following functions:
1) Crossovers (Linkwitz-Riley, Bessel or Butterworth),
2) Band limiters,
3) Equalisation assignable to inputs and outputs,
4) Input and output delay

 

Martin MX4 system controller
Martin MX4 system controller

The MX4 controller is specifically designed to optimise the performance of Martin Audio systems. Crossover frequencies, output levels and phase adjustments are all pre-set for a given system arrangement via a dedicated internal plug-in boards.

 

 

 

 

Klark Technik DN716 line delay unit
Klark Technik DN716 line delay unit

The Klark Teknik DN716 is a multiple output digital audio line delay unit, offering over 1.3 seconds of signal delay per output. It is the ideal solution for time correcting delay speakers in larger venues.

 

 

 

 

Graphic Equalisers
DBX EQ2231
DBX EQ2231

The DBX EQ2231 is a very high quality 3 rack unit dual 31-band graphic equaliser - featuring 31 equalization bands at 1/3 octave intervals from 20Hz to 20kHz, with sweepable Hi-pass filters, output level displays and a built in limiter.

 

 

 

 

DBX EQ231
DBX EQ231

The DBX EQ231 is compact 2rack unit dual 31-band graphic equaliser - featuring 31 equalization bands at 1/3 octave intervals from 20Hz to 20kHz, with sweepable Hi-pass filters and built in output level displays.

 

 

 

 

Yamaha Q2031B
Yamaha Q2031B

The Yamaha Q2031B graphic equalizer incorporates active filters to provide minimum phase shift and smooth response at any boost or cut setting. The Q2031B offers 31 equalization bands at 1/3 octave intervals from 20Hz to 20kHz with sweepable hi-pass filters

 

 

 

 

Yamaha Q2015B
Yamaha Q2015B

The Yamaha Q2015B graphic equalizer is a compact 15 band EQ that incorporates active filters to provide minimum phase shift and smooth response at any boost or cut setting. The Q2031B offers 15 equalization bands at 1/3 octave intervals from 20Hz to 20kHz with sweepable hi-pass filters

 

 

 

Reverbs & Multi Effects Units
Yamaha SPX 990
Yamaha SPX 990

The Yamaha SPX990 is a very high quality multi effects processor. It features dual stereo effects with reverb, delay, pitch and modulation, with independent processing on each input. The unit is fully programable with the ability to save user settings.

 

 

 

 

Lexicon MPX1
Lexicon MPX1

The lexicon MPX1 is a very high specification multi effects processor. It features dual stereo effects with reverb, delay, pitch and modulation with independent processing on each input, for stereo or dual mono processing, routable in any configuration. Upto 5 stereo effects can be used simultaneously

 

 

 

Lexicon MPX100
Lexicon MPX100

Lexicon MPX-100 multi effects processor, features dual stereo effects with reverb, delay, pitch and modulation, with independent processing on each input

 

 

 

 

TC Electronics D-Two
TC Electronics D-Two

The D Two is a high quality vocal delay with a 'built in' tap feature, allowing rhythm patterns to be tapped directly according to a specific tempo. The delays and rhythm patterns can be up to 10 seconds each.

 

 

 

 

TC Electronics M300
TC Electronics M300

The TC Electronic M300 multi effects unit features a dual-engine, allowing 2 different effects to run simultaneously. It provides 15 different reverbs and 15 other effects including delay, chorus, flanger, tremolo, dynamics, de-esser, compressor, and limiter.

 

 

 

 

Gates & Compressors
DBX 266XL
DBX 266XL

The 266XL Compressor gives total dynamic control, ensuring that both its compression and gating provide versatility and excellent sonic performance in all situations.

 

 

 

 

Behringer MDX2200
Behringer MDX2200

The MDX2200 compressor features: switchable auto mode, a peak limiter and an expander/gate. The unit gives indispensable tools for dynamic processing.

 

 

 

 

Mixing Desks

Midas Venice
Midas Venice

The Midas Venice 320 is an extremely versatile 32 channel audio mixer. Built to the highest of standards, it is considered to be the best small frame mixing console available. Designed for professional sound reinforcement, the console features: 32 inputs including 2 stereo inputs, 4 band EQ with 2 parametric mids, 6 auxilury sends, 4 sub groups and a mono sum output. The desk is highly versatile, and can be used in a wide range of applications.

 

 

Soundcraft Spirit M12
Soundcraft Spirit M12

The Soundcraft M12 is a compact, high quality mixing desk designed for professional sound reinforcement. It features: 12 mono inputs, 4 stereo inputs, 3 band EQ with parametric mid, 4 auxilury sends and a mono sum. The desk is highly versatile, and can be used in a wide range of applications.

 

 

 

Soundcraft Spirit M8
Soundcraft Spirit M8

The Soundcraft M8 is a high quality mixing desk designed for professional sound reinforcement. It features: 8 mono inputs, 4 stereo inputs, 3 band EQ with parametric mid, 4 auxilury sends and a mono sum. The desk is highly versatile, and can be used in a wide range of applications.

 

 

 

Soundcraft Spirit Folio
Soundcraft Spirit Folio

The Soundcraft Spirit Folio F1 is a compact, high quality mixing desk designed for professional sound reinforcement. It features: 8 mono inputs, 2 full stereo inputs, 2 basic stereo inputs 3 band EQ with parametric mid and 3 auxilury sends. The desk is highly versatile, and can be used in a wide range of applications.

 

 

 

Soundcraft Spirit FX8
Soundcraft Spirit FX8

The Soundcraft Spirit FX8 is a compact, high quality mixing desk designed for professional sound reinforcement. It features: 8 mono inputs, 2 full stereo inputs, 2 basic stereo inputs 3 band EQ with parametric mid, 3 auxilury sends, 2 routable sub groups and a Lexicon multi effects module. The desk is highly versatile, and can be used in a wide range of applications.

 

 

 

Soundcraft Spirit Powerstation 600
Soundcraft Spirit Powerstation 600

The Soundcraft Powerstation 600 is a high quality mixing with an on board 2 channelamplifier. It features: 8 mono inputs, 2 stereo inputs, 3 band EQ with parametric mid, 3 auxilury sends, 2 routable sub groups, 2 seven band output EQs and a Lexicon multi effects module. The desk is highly versatile, and can be used in a wide range of applications.

 

 

 

Playback & Recording

Sony CD player
Sony CD player

Sony CD player suited to use in a wide range of applications.

 

 

 

 

 

Sony Minidisc player
Sony Minidisc player

Sony minidisc recorder suited to use in a wide range of applications. Includes longplay facility.

 

 

 

 

 

Denon DN M1050R Minidisc player
Denon DN M1050R Minidisc player

The DN M1050R is a high specification, rackmount minidisc recorder designed for professional use. Features include: full edit facilities, cue facility, instant start, longplay facility.

 

 

 

 

Tascam DA20 DAT recorder
Tascam DA20 DAT recorder

The Tascam DA20 is a high specification, rackmount DAT recorder, designed for professional use. Features include: Analogue and digital inputs / outputs, longplay facility.

 

 

 

 

Small playback rack c/w 1x CD player; 1x Minidisc player
Small playback rack c/w 1x CD player; 1x Minidisc player

 

 

 

 

 

 

Large playback rack c/w 2x CD players; 2x Minidisc players
Large playback rack c/w 2x CD players; 2x Minidisc players

 

 

 

 

 

 

Microphones & DI Boxes

Radio Microphones & Accessories
Sennheiser ew100 hand held UHF system
Sennheiser ew100 hand held UHF system

The Sennheiser EW100 is a high specification handheld, UHF radio microphone system suitable for use in a wide range of applications. The system comprises of an EW100 UHF receiver and a SKM135 handheld dynamic microphone. Features include 1440 tunable UHF frequencies, with 4 directly accesible presets.

 

 

 

Sennheiser ew100 lavelier / lapel UHF system
Sennheiser ew100 lavelier / lapel UHF system

The Sennheiser EW100 is a high specification lavelier, UHF radio microphone system suitable for use in a wide range of applications. The system comprises of an EW100 UHF receiver, a SK100 body pack transmitter and an ME4 clip on lavelier microphone. Features include 1440 tunable UHF frequencies, with 4 directly accesible presets.

 

 

 

Sennheiser ew100 headset UHF system
Sennheiser ew100 headset UHF system

The Sennheiser EW100 is a high specification headset, UHF radio microphone system suitable for use in a wide range of applications. The system comprises of an EW100 UHF receiver, a SK100 body pack transmitter and an ME3 headset microphone. Features include 1440 tunable UHF frequencies, with 4 directly accesible presets.

 

 

 

Sennheiser ASP2 UHF antenna splitter
Sennheiser ASP2 UHF antenna splitter

The Sennheiser ASP2 is a high quality 4 way antenna distribution unit designed specifically for use with EW series radio microphone systems. The unit allows a single pair of UHF antennae to feed upto 4 receivers. 2 x ASP2's can be linked for 8-way distribution. Supplied with an NT1-UK power supply.

 

 

 

Sennheiser 1031 UHF plate antenna kit
Sennheiser 1031 UHF plate antenna kit

 

 

 

 

 

 

High gain UHF di-pole antenna kit
High gain UHF di-pole antenna kit

A pair of high quality UHF dipole antennae. Suitable for use with multiple receiver Sennhieser systems, the high gain, dipole antennae are designed to give outstanding interference free performance. Each antenna features a sping clip, allowing for ease of mounting and re-positioning.

 

 

 

Trantec headset radio microphone & receiver
Trantec headset radio microphone & receiver

The Trantec ... is a VHF radio headset microphone system. The system comprises of a VHF receiver, a body pack transmitter and a headset microphone.

 

 

 

 

Vocal & Instrument Microphones
Shure SM 58
Shure SM 58

The Shure SM58 is the industry standard vocal microphone. It is a unidirectional, cardioid, dynamic microphone that is specifically designed for professional vocal use in live performance and sound reinforcement. It is considered by many to be the best vocal microphone available.

 

 

 

Shure Beta 58A
Shure Beta 58A

The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement. The supercardioid pick up pattern throughout its frequency range, ensures high gain before feedback and maximum isolation from other sound sources.

 

 

 

Shure SM 57
Shure SM 57

The Shure SM57 is a multi-purpose microphone with a contoured frequency response for clean sound reproduction of amplified or acoustic instruments. Typical applications include drums, guitar amplifiers, brass, woodwinds.

 

 

 

 

Shure Beta 57A
Shure Beta 57A

The Shure Beta 57A is a high-output supercardioid dynamic instrument microphone designed for professional sound reinforcement, providing optimal warmth and presence. The supercardioid pick up pattern throughout its frequency range ensures high gain before feedback and maximum isolation from other sound sources. Typical applications include drums, guitar amplifiers, brass, woodwinds and vocals.

 

 

Shure Beta 52A
Shure Beta 52A

 

 

 

 

 

 

Audio Technica AT871R boundary microphone
Audio Technica AT871R boundary microphone

The AT871R is a unidirectional condenser boundary microphone. It is specifically designed for surface-mount applications requiring high-quality sound pickup. It features an extended frequency response and uniform cardioid (120°) polar pattern. Typical applications include use as a table top microphone.

 

 

 

Audio Technica AT857AMLX  gooseneck microphone
Audio Technica AT857AMLX gooseneck microphone

The AT857 cardiod condenser, gooseneck microphone is specifically designed for high-quality sound reinforcement. Its small-diameter, alternating gooseneck design permits highly flexible positioning. Typical applications include use as a lecturn microphone and a table top microphone.

 

 

 

Sennheiser MD 421
Sennheiser MD 421

The large diaphragm, dynamic element of the MD 421, is designed specifically to handle high sound pressure levels, making it ideal for many applications. The MD 421's full-bodied cardioid pattern, and five-position bass control give it a high amount of flexibility. Typical applications include drums, guitar amplifiers, brass, woodwinds and vocals.

 

 

 

Senheiser 604
Senheiser 604

Sennheiser's E604 is designed specifically to clip on to drums, to facilitate close pick up, on snares and toms. The microphone's frequency and cardiod pick up pattern are optimised for drums and percusion. It is intended for use in professional sound reinforcement applications and will withstand high sound pressure levels, whilst providing outstanding performance. Typical applications include snare drums toms, percussion, brass and woodwind.

 

 

AKG C3000
AKG C3000

The AKG C3000 is a high quality, large diaphragm general purpose condenser microphone, with an excellent full range frequency response. It is suitable for a wide range of applications and features a built in frequency contour switch. Its outstanding performance characteristics make it an excellent choice for professional sound reinforcement. Typical applications include overhead and long distance pick up, brass, woodwinds, choirs and acoustic instruments.

 

 

AKG SE300B
AKG SE300B

The AKG SE300B is a general purpose condenser microphone, suitable for a wide range of applications, with a selectable contoured frequency response, for clean sound reproduction. Its outstanding performance charicteristics make it an excellent choice for professional sound reinforcement. Typical applications include overhead and long distance pick up, brass, woodwinds, choirs and acoustic instruments.

 

 

AKG C1000
AKG C1000

The AKG C1000 is a high quality, general purpose condenser microphone. It is suitable for a wide range of applications and features a built in frequency contour switch.Typical applications include overhead and long distance pick up, brass, woodwinds, choirs and acoustic instruments.

 

 

 

Beyer Dynamic M88
Beyer Dynamic M88

The M88 is a dynamic, hyprcardioid, instrument microphone designed for professional sound reinforcement. Its large diaphragm handles high sound pressure levels well, whilst providing optimal warmth and presence, making it ideal for many applications. Typical applications include large drums, bass guitar, general instruments and vocals.

 

 

 

DI Boxes
LD systems LDI-02 active DI box
LD systems LDI-02 active DI box

The LD systems LDI-02 is a high specification active direct injection box designed for use in professional sound reproduction applications. Features iclude a ground lift switch to minimise potential hum problem and a selectable input attenuater. The unit can be powered from either an internal 9V battery or external 48V phantom power.

 

 

 

EMO E520 passive DI box
EMO E520 passive DI box

The EMO E520 is a passive direct injection box, featuring double stack transformers for enhanced response and interference suppression. Outputs are fully floating with a ground lift switch to minimise potential hum problems.

 

 

 

 

Stands & Accessories

Tall microphone stand
Tall microphone stand

Heavy duty tall microphone stand. Supplied in black, with fully adjustable telescopic boom.

 

 

 

 

 

Short microphone stand
Short microphone stand

Heavy duty short microphone stand. Supplied in black, with fully adjustable telescopic boom.

 

 

 

 

 

Miniature round base microphone stand
Miniature round base microphone stand

A high quality round based stand designed specifically for mounting on surfaces such as tables and lecturns. Ideal for use with goose neck microphones.

 

 

 

 

Speaker stand
Speaker stand

A heavy duty, stable and robust, tripod style speaker stand. Supplied in black and designed for use with 35mm top hat fittings.

 

 

 

 

 

500mm Speaker pole
500mm Speaker pole

Designed specifically for mounting mid hi speaker cabinets onto sub bass cabinets that have 35mm top hats fitted

 

 

 

 

 

 

In addition to PA system hire, we also stock a wide range of other professional hire equipment, suitable for many different applications. For specific hire requirements please visit www.eisaudiovisual.co.uk where you can choose from our full list of available hire equipment, including:
Sound hire, Lighting hire, Stage hire, Radio microphone hire, Projector Hire, Screen hire,
Audio visual hire, PA system hire and Starcloth hire.

EIS Audio Visual supply high quality sound, lighting and audio visual equipment hire to North Wales & Northwest England. We provide sound hire, lighting hire, stage hire, projector hire, and a wide range of other audio visual equipment hire, for the following types of event:

Conference, speech, presentation and film screening events : Exhibition, display, product launch & trade shows Birthday party, wedding celebration, corporate parties & award ceremony events.
Theatre, cabaret, concert, band & live music performance events : Music festival, club, disco & dance music events

EIS Audio Visual supply sound hire, lighting hire, stage hire, projector hire, & AV equipment hire to the following areas:

North Wales including:

Anglesey : Beaumaris : Holyhead : Llangefni : Menai Bridge : Denbighshire : Denbigh : Llangollen : Prestatyn : Rhuddlan : Rhyl : Clwyd : Ruthin : St Asaph : Conway : Abergele : Betws y coed : Colwyn Bay : Conwy : Llandudno : Llanwrst : Towyn : Flintshire : Buckley : Deeside : Flint : Holywell : Mold : Mostyn : Northop : Queensferry : Shotton : Gwynedd : Abersoch : Bangor : Barmouth : Caernarfon : Nefyn : Porthmadog : Pwllheli : Wrexham : Oswestry : Shrewsbury

North West England including:

Cheshire : Chester : Congleton : Crewe : Daresbury : Ellesmere Port : Frodsham : Holmes Chapel : Knutsford : Lymm : Macclesfield : Malpas : Northwich : Nantwich : Preston Brook : Runcorn : Wilmslow : Winsford : Warrington : Widnes : Greater Manchester : Altrincham : Ashton-under-Lyne : Bury : Bolton : Oldham : Rochdale : Salford : Stockport : Stretford : Wigan : Lancashire : Blackburn : Blackpool : Bolton : Burnley : Chorley : Ormskirk : Merseyside : Ainsdale : Aintree : Birkenhead : Bromborough : Crosby : Huyton : Knowsley : Liverpool : Port Sunlight : Rock Ferry : Southport : Wallasey : West Kirby : Wirral : Woolton